Recent Posts

Archive

Tags

MINING METHOD OF THE WEEK - STRIP MINING!!

Strip mining, removal of soil and rock (overburden) above a layer or seam (particularly coal), followed by the removal of the exposed mineral. The common strip-mining techniques are classified as area mining or contour mining on the basis of the deposit geometry and type. The cycle of operations for both techniques consists of vegetation clearing, soil removal, drilling and blasting of overburden (if needed), stripping, removal of the coal or other mineral commodity, and reclamation. Area mining is appropriate for the extraction of near-surface, relatively flat-lying, and thin deposits of coal, phosphate, and similar minerals. Area mining usually progresses in a series of parallel deep trenches referred to as furrows or strips. The length of these strips may be hundreds of metres. Contour mining progresses in a narrow zone following the outcrop of a mineral seam in mountainous terrain - Encyclopaedia Britannica.

©2020 by School of Rock.